Pultruded Fiberglass Grating
Kenway Composites provides pultruded fiberglass grating through Creative Pultrusions.
Supergrate® Pultruded Grating is a high strength lightweight fiberglass grating system fabricated from highly corrosion resistant I or T bars. The I or T bars are connected mechanically and adhesively with a unique notch and groove bar system. The pultrusion process is a continuous process where resin, roving, matt and surface veil are guided into a heated die to make a constant cross-section. The synthetic surface veil provides a resin rich surface for corrosion resistance and UV protection.
The fabricated grating is exceptionally stiff boasting modulus of elasticity of over 5 Msi. The 65,000 psi bending strength means that this grating is built for durability. The combination of strength and stiffness give the Supergrate®attributes that are ideal for industrial flooring applications in which impact strength and toughness are daily requirements.
Supergrate® Pultruded Grating can achieve longer spans and higher load capacity than the standard molded FRP grating system. Learn More!
• Boat Docks
Supergrate Pultruded Grating Offered in:
Thickness: 1”, 1-1/2” and 2”
Open Area: 1” deep and 1-1/2” deep “I” shaped bar in 40%, 50%, and 60%
2” deep “T” shaped bar in 33% and 50% open area
Panels Sizes: Various Sizes
Cross Rod Spacing: 6” and 12”
Antiskid Top Surfaces: Grit Top – epoxy bonded quartz aggregate
Colors: Yellow and Dark Gray
Resin System: Isophthalic Polyester Fire Retardant
Vinyl Ester Fire Retardant
Fire Retardant pultruded grating products perform to a Class 1 Fire Rating of 25 or Less Per ASTM E-84 and are Self Extinguishing per ASTM D-635.
*Special resins, colors, and lengths are available.
Features and Benefits:
• Corrosion Resistance
• UV Resistance
• Maintenance Free
• Long Life
• Electrical and Thermal Insulation
• Electromagnetic Transparency
A standard line of panel hold-down clips, panel connectors, curb angle and other grating support systems are available.